MouseBlocker 1000 Plug-In Anti-Rodent Mouse Vehicle Protection System 51599

Description

MouseBlocker 1000 Anti-Rodent Protection MB51599
The MouseBlocker 1000 is next level protection for your garage, to guard your vehicle and equipment from the costly damage caused by mice, rats, squirrels, and other rodents. Designed to protect up to 1000-sq. ft –(2-4 car garage)-the device features four high-powered speakers that release high-frequency, ultrasonic sounds, in varying frequencies/patterns to deter rodents from the area. Operates on standard 110v AC power plug. Measures 21” x 7” x 9”.
Outputs 2 types of special ultrasonic waves simultaneously.
Covers up to 1000 square feet with a clear line of site.
110v AC Power plug
5 pounds
21" x 7" x 9"
Function
The MouseBlocker 1000x uses modern micro-electronics technology outputting 2 types of special ultrasonic waves simultaneously. These waves act upon the hearing and nervous system of rodents making them unpleasant and uncomfortable. This unit is designed to drive the mice away from protected areas. The
frequencies output from the 1000x are constantly changing and alternating eliminating the chance of rodents adapting to the sound.
Coverage Area
The MouseBlocker 1000x is a very high output device covering up to 1000 square feet with a clear line of
site. Since the unit operates off sound, the noise will not go thru walls or solid objects. Place the unit with
speakers facing open space free of obstructions
Operation Methods
Plug one end of the included power cord into the power socket on the left rear side of the unit. Plug the
other end of the power cord into any available 110v power outlet. After pluggin the unit into power, it will
start working imediately. The green power light should be on solid and the blue ultrasonic light should be
flashing/blinking according to the sound output.
Testing output: There is a green test button on the back of the unit. Pressing this button will amplify the ultra
sonic noise to an audible level. This noise is very loud and confirms that the microproccessor is working
properly.
Precautions
1. Never use the device outdoors, in high temperature locations or damp locations.
2. The MouseBlocker 1000x should be used continuously without stopping to be effective.
3. There should be no obstructions in front of the unit. Ultrasonic noises will not pass thru hard objects.
4. There are four loud speakers installed in three directions so the device should be installed along a wall,
with the back facing a wall for optimal effectiveness.
5.It is normal if the device gets warm to the touch.
6.The effects of this unit will be seen immediately as soon as the device is powered on. The unit will be most
effective after using it continuously for 3-4 weeks. Sometimes the mice may be more active during the
begining of use showing that the rodents are irritated. After using the unit for a prolong period of time the
mice will begin to dissapear.
Unit Technical Specifications
AC Power Voltage: AC 120v 60hz
Power Consumption: 25Watts
Frequency Coverage: 25-45Khz Intermittent at 160 Seconds
Made in China EPA Est No: 95016-CHN-1