-40%
MORAT MOTOR 1/3 HP 24 VOLT 6 IN DIAMETER FITS INSIDE 6 INCH TUBE
MORAT MOTOR 1/3 HP 24 VOLT 6 IN DIAMETER FITS INSIDE 6 INCH TUBE
MORAT MOTOR 1/3 HP 24 VOLT 6 IN DIAMETER FITS INSIDE 6 INCH TUBE
MORAT MOTOR 1/3 HP 24 VOLT 6 IN DIAMETER FITS INSIDE 6 INCH TUBE
MORAT MOTOR 1/3 HP 24 VOLT 6 IN DIAMETER FITS INSIDE 6 INCH TUBE
MORAT MOTOR 1/3 HP 24 VOLT 6 IN DIAMETER FITS INSIDE 6 INCH TUBE

MORAT MOTOR 1/3 HP 24 VOLT 6 IN DIAMETER FITS INSIDE 6 INCH TUBE

$ 118.8

Availability: 50 in stock
  • Rated Load (HP): 1/3
  • Nominal Rated Input Voltage: 24 V
  • Current Type: DC
  • MPN: Does Not Apply
  • NEMA Frame Suffix: HP
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • Brand: MORAT

    Description

    I have close to 100 of these brand new 24V motors.  They were designed to go inside a 6 inch tube for an automatic pool cover.
    They are rated at 1/3 HP.  Here are the specs.  These cost us over 0 each when purchased.  The clear one on the right was a prototype given to us for approval before the final design.  It is just to show you the gears inside.  There is also an opposing hub that you can have if for some reason you would put this in a tube.
    Description:
    24 VDC. 0.3 hp Drum-type
    Gear Motor without brake
    Special high- reduction ratio 213.75:1
    Included extra end cover with bearing and hub
    It would run at 3
    6
    00 RPM and draw 22 Amps.
    Manufactured by: Franz Morat KG in Germany